FAFNIR SAL2 15/16 Pillow Block Bearings

Brand Name FAFNIR SAL2 15/16 Pillow Block Bearings
Model Number SAL2 15/16
Min.Order Quantity 1 pcs
Price Negotiable

Product Details

Bearing number71912 CB/HCP4A
Size (mm)85x60x13
Bore Diameter (mm)85
Outer Diameter (mm)60
Width (mm)13
d60 mm
D85 mm
B13 mm
d168.94 mm
d267.73 mm
D278.36 mm
r1,2 - min.1 mm
r3,4 - min.0.3 mm
a19.5 mm
da - min.64.6 mm
db - min.64.6 mm
Da - max.80.4 mm
Db - max.83 mm
ra - max.1 mm
rb - max.0.3 mm
dn69.8 mm
Basic dynamic load rating - C10.4 kN
Basic static load rating - C08.8 kN
Fatigue load limit - Pu0.375 kN
Limiting speed for grease lubrication26000 r/min
Limiting speed for oil lubrication40000 mm/min
Ball - Dw5.556 mm
Ball - z30
Gref2.77 cm3
Calculation factor - f09.8
Preload class A - GA34 N
Preload class B - GB68 N
Preload class C - GC205 N
Calculation factor - f1
Calculation factor - f2A1
Calculation factor - f2B1.03
Calculation factor - f2C1.08
Calculation factor - fHC1.01
Preload class A40 N/micron
Preload class B53 N/micron
Preload class C85 N/micron
r1,2 min.1 mm
r3,4 min.0.3 mm
da min.64.6 mm
db min.64.6 mm
Da max.80.4 mm
Db max.83 mm
ra max.1 mm
rb max.0.3 mm
Basic dynamic load rating C14 kN
Basic static load rating C014.6 kN
Fatigue load limit Pu0.375 kN
Attainable speed for grease lubrication26000 r/min
Attainable speed for oil-air lubrication40000 r/min
Ball diameter Dw5.556 mm
Number of balls z30
Reference grease quantity Gref2.77 cm³
Preload class A GA34 N
Static axial stiffness, preload class A40 N/µm
Preload class B GB68 N
Static axial stiffness, preload class B53 N/µm
Preload class C GC205 N
Static axial stiffness, preload class C85 N/µm
Calculation factor f1.11
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.03
Calculation factor f2C1.08
Calculation factor fHC1.01
Calculation factor f09.8
Mass bearing0.18 kg
View more

Company Profile

Worktime Seg - Sex (9.00 - 18.00) Sáb (9: 00-12: 00)
Phone (65) 8257 8518
Fax (65) 6258 7399
View more

Related News

  • Prefix Suffix Definition . . ROLLER BRG . . . -JFT REED TORQUE TEST, AVERAGE TORQUE VALUE OF 1000 MG/MM . 2 REED BEARING W/O.D. CODED TO 0.0001 INCH INCREMENTS...
  • At present, some large-scale open-pit coal mining equipment generally has the characteristics of large production capacity, high automatic function and high investment in single equipment. Therefore, based on these characteristics, if the equipment is...
  • Lubricating oils for agricultural machinery include engine oils, gear oils and greases. Reasonable use of lubricating oil, providing good lubrication to agricultural machinery, can reduce wear, improve the performance of machinery, reduce the occurrence of...
  • Recommended Products

    All Products Contact Now