| Bearing (basic designation) | 24076 |
| Locating ring | 2 x FRB 10/560 |
| da | 380 mm |
| db | 400 mm |
| d2 | 547 mm |
| Ca | 200 mm |
| Da | 560 mm |
| A | 400 mm |
| A1 | 360 mm |
| ATS | 410 mm |
| ATK | 528 mm |
| H | 675 mm |
| H1 | 340 mm |
| H2 | 120 mm |
| J | 810 mm |
| J1 | 220 mm |
| L | 950 mm |
| N | 50 mm |
| N1 | 42 mm |
| s | 24 mm |
| ba min. | 157 mm |
| ba max. | 197 mm |
| bb | 152 mm |
| bc | 202.5 mm |
| J6 | 880 mm |
| N4 max. | 25 mm |
| Labyrinth seal | 2 x TS 84 |
| Taconite seal | 2 x TK 84 |
| End cover | ETS 84 |
| P0° | 6000 kN |
| P55° | 7500 kN |
| P90° | 3600 kN |
| P120° | 2600 kN |
| P150° | 2300 kN |
| P180° | 3000 kN |
| Q120° | 4200 kN |
| Q150° | 2400 kN |
| Q180° | 2100 kN |
| Mass housing | 415 kg |
| Cap bolt, size | M 36x240 |
| Cap bolt, rec. tightening torque | 600 N·m |
| Appropriate attachment bolt, size G | 36 mm |
| Appropriate attachment bolt, rec. tightening torque | 2280 N·m |
| Eye bolt, size | 2 x M 30 |
| Initial grease fill, 20% | 6.2 kg |
| Initial grease fill, 40% | 9.4 kg |
