| da |
61.913 mm |
| Da |
130 mm |
| Ca |
37.008 mm |
| A1 |
79.375 mm |
| A2 |
195.262 mm |
| S |
3.175 mm |
| ba |
32.544 mm |
| H |
161.925 mm |
| H1 |
82.55 mm |
| H2 |
30.163 mm |
| J min. |
219.075 mm |
| J max. |
244.475 mm |
| J1 |
47.625 mm |
| L |
285.75 mm |
| N1 |
19.05 mm |
| R1 |
46.038 mm |
| R2 |
21.431 mm |
| RG |
1/4 NPT |
| PG |
1/8 NPT |
| h |
28.575 mm |
| Housing |
SAFS 515 |
| Stabilizing ring |
SR-15-0 |
| Taconite seal |
TER 37 |
| End plug (suffix Y) |
EPR 7 |
| Max. speed for Taconite seal |
1250 r/min |
| P60° |
104 kN |
| P90° |
59.6 kN |
| P120° |
36.9 kN |
| P150° |
33.4 kN |
| P180° |
40 kN |
| Pa |
6.94 kN |
| Mass pillow block |
15.4 kg |
| Cap bolt |
2 x 1/2-13 UNC |
| Cap bolt recommended tightening torque |
149.1 N·m |
| Cap bolt, SAE grade |
8 |
| Appropriate attachment bolt size G |
0.625 in |
| Initial grease fill |
68.04 g |