| Series |
M716600 |
| Cone Part Number |
JM716648 |
| Cup Part Number |
JM716615 |
| Design Units |
METRIC |
| Bearing Weight |
1.6 Kg |
| Cage Type |
Stamped Steel |
| d |
85 mm |
| D |
135.000 mm |
| B - Cone Width |
29.000 mm |
| C - Cup Width |
27 mm |
| B |
33.000 mm |
| R - Cone Backface To Clear Radius1 |
6.100 mm |
| r - Cup Backface To Clear Radius2 |
2.54 mm |
| da - Cone Frontface Backing Diameter |
91.95 mm |
| db - Cone Backface Backing Diameter |
103.89 mm |
| Da - Cup Frontface Backing Diameter |
128.02 mm |
| Db - Cup Backface Backing Diameter |
119.89 mm |
| Ab - Cage-Cone Frontface Clearance |
3 mm |
| Aa - Cage-Cone Backface Clearance |
1.8 mm |
| a - Effective Center Location3 |
-0.3 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 |
41800 N |
| C1 - Dynamic Radial Rating (1 million revolutions)5 |
161000 N |
| C0 - Static Radial Rating |
245000 N |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
31800 N |
| K - Factor7 |
1.31 |
| e - ISO Factor8 |
0.44 |
| Y - ISO Factor9 |
1.35 |
| G1 - Heat Generation Factor (Roller-Raceway) |
117.1 |
| G2 - Heat Generation Factor (Rib-Roller End) |
38.4 |
| Cg - Geometry Factor |
0.13 |