| Bearing (basic designation) |
24076 |
| Locating ring |
2 x FRB 10/560 |
| da |
380 mm |
| db |
400 mm |
| d2 |
547 mm |
| Ca |
200 mm |
| Da |
560 mm |
| A |
400 mm |
| A1 |
360 mm |
| ATS |
410 mm |
| ATK |
528 mm |
| H |
675 mm |
| H1 |
340 mm |
| H2 |
120 mm |
| J |
810 mm |
| J1 |
220 mm |
| L |
950 mm |
| N |
50 mm |
| N1 |
42 mm |
| s |
24 mm |
| ba min. |
157 mm |
| ba max. |
197 mm |
| bb |
152 mm |
| bc |
202.5 mm |
| J6 |
880 mm |
| N4 max. |
25 mm |
| Labyrinth seal |
2 x TS 84 |
| Taconite seal |
2 x TK 84 |
| End cover |
ETS 84 |
| P0° |
6000 kN |
| P55° |
7500 kN |
| P90° |
3600 kN |
| P120° |
2600 kN |
| P150° |
2300 kN |
| P180° |
3000 kN |
| Q120° |
4200 kN |
| Q150° |
2400 kN |
| Q180° |
2100 kN |
| Mass housing |
415 kg |
| Cap bolt, size |
M 36x240 |
| Cap bolt, rec. tightening torque |
600 N·m |
| Appropriate attachment bolt, size G |
36 mm |
| Appropriate attachment bolt, rec. tightening torque |
2280 N·m |
| Eye bolt, size |
2 x M 30 |
| Initial grease fill, 20% |
6.2 kg |
| Initial grease fill, 40% |
9.4 kg |